Electronic Crossover
Stereo 3-Way / 2-Way electronic crossover
Low, mid-low, mid-high, & high pass selectors
Low, mid, & high output level controls
Three Way Operation w/180 Hz & 6 kHz Crossover Points
Two Way Operation w/1 kHz Crossover Point
1. POWER ON/OFF SWITCH: Use to turn unit ON or OFF.
2. POWER ON LED INDICATOR: Lights up when unit is on.
3. LOW FREQUENCY CROSSOVER SWITCH: Use to select the crossover
frequency point between low & mid-range at 50, 90, 180, 360, 720 Hz.
4. MID FREQUENCY CROSSOVER HIGH-PASS FILTER SWITCH: Use to
select the low frequency crossover point of the high-pass filter of midrange
at 50, 90, 180, 360, 720 Hz or to set it FLAT.
5. MID FREQUENCY CROSSOVER LOW-PASS FILTER SWITCH: Use to
select the high frequency crossover point of the low-pass filter of midrange
at 1k, 2k, 4k, 6k, 8 kHz or to set it FLAT.
6. HIGH FREQUENCY CROSSOVER SWITCH: Use to select the crossover
frequency point between high & mid-range at 1k, 2k, 4k, 6k, 8 kHz.
7. LOW FREQUENCY LEVEL (VOLUME) CONTROL: Use to adjust the
output level of low frequency output.
8. MID FREQUENCY LEVEL (VOLUME) CONTROL: Use to adjust the
output level of mid frequency output.
9. HIGH FREQUENCY LEVEL (VOLUME) CONTROL: Use to adjust the
output level of high frequency output.
Input Impedance........................>47K OHM
Crossover Frequency:
LOW....................50, 90, 180, 360, 720 Hz
MID (HIGH PASS)..............50, 90, 180, 360, 720 Hz, FLAT
MID (LOW PASS)................1k, 2k, 4k, 6k, 8 kHz & FLAT
HIGH.....................1k, 2k, 4k, 6k, 8 kHz
Filter Slope......................12 dB/octave
Total Harmonic Distortion.....................<0.01%
Frequency Response (summed).........20HZ~20KHZ (±0.5dB)
S/N Ratio..........................90dB
Power Requirement..............110V/220V, 50HZ/60HZ
Power Consumption.......................6W
Dimensions............19"w x 1.75"h x 8"d (483 x 45 x 203 mm) |
