Tailored frequency response is smooth and extended. Tuned specifically for vocal applications.
Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides.
Less susceptible to feedback in high volume settings.
Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion.
Cartridge includes a neodymium magnet for high output level.
Durable metal construction.
On/off switch for onstage control.
Steel mesh ball grille with integral "pop" filter reduces explosive breath sounds and wind noise.
The PG48-XLR includes a 15 ft (4.57m) XLR to XLR Cable, Microphone Clip, 5/8" to 3/8" Thread Adapter, and a Storage Bag.
Microphone Type
Dynamic (moving coil)
Polar Pattern: Cardioid (unidirectional)
Frequency Response: 70 to 15,000 Hz
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 rela-tive to pin 3 of microphone output connector
Output Impedance (at 1000 Hz): 600 ohms
Sensitivity (at 1000 Hz): -52 dBV/Pa, (2.5 mV), 1 Pascal = 94 dB SPL
Electromagnetic Hum Sensitivity: 22 dB equivalent SPL in a 1 millioersted field (60 Hz)
Switch: Built-in On/Off switch
Connector: Three-pin professional audio connector (male XLR type)
Case: Die cast metal handle, black matte finish; hardened silver colored, spher-ical steel mesh grille
Environmental Conditions
This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.
Weight Net: 314 g (11.1 oz)
Packaged: 890 g (1 lb 15 oz)
|
